Seamless joint Wall panels

Food processing

Seamless Joint wall panels

These products are designed as a wall panel with a seamless tongue and groove joint. These panels are Ideal in wet or dry environments for indoor and outdoor areas and available in four different surface finishing such as, high gloss white, Satin white, Matt white and Walnut. The white finishes are UV oil treated for steady colour in long term

Advantages

Smart Tongue & groove system

Low Maintenance

AU/NZ Certified

Pre-Finished

Waterproof

Fast And easy to install

Easy to Clean

Rated ( Group 1 )

No Cracks, Warping or rotting

Light weight (3.6 ~ 4 KG/sqm)

100% Recyclable

Chemical resistant

High Flexibility

Insect Proof

Cost Effective

Cost Effective

PRODUCT RANGE

These panels come with a Standard length of 5800mm with the following dimensions

300mmx10mm ( Width X Thickness )

HW-30

HW30 - High Gloss white

A 300mmx5800x10mm High gloss panel

400mmx8mm ( Width X Thickness )

ٍSw40

HW30 - High Gloss white

A 400mmx5800x8mm Satin white panel

Accessories

J profile

End Cap ( J profile )

The J profile is used to cap off the ends of the panel where the ceiling panels meet the wall or simply to cap off the cut section of the panel around corners. Comes either in PVC with a matching finish of the panel, or in Aluminum with either a white, black or a silver surface finish.

H profile

H profile

The H profile is used to extend the panel beyond the standard length or to create a hidden joint instead of staggering the panels. the H profile comes either in PVC with a matching finish to each panel, or in aluminum with three standard finishes, Black, White and silver.

External Corner

External Corner

The External Corner is used where the panels meet at a 270 angle. such as the external corners around walls and windows. it comes in either in PVC with the same finish as the panel, or in aluminum with three standard colors, White, black and silver.

Internal Corner

Internal Corner

The External Corner is used where the panels meet at a 90 angle. such as the internal corners around walls and the ceiling . it comes in either in PVC with the same finish as the panel, or in aluminum with three standard colors, White, black and silver.

Technical & Downloads

Chemical composition

PVC resin and calcium carbonate

Surface Treatment & Colour

  • Transfer printing and laminated with a UV resistant coating
  • Custom design and colors can be made for bulk orders

Applications

  • bathrooms
  • caravan interiors
  • portable homes
  •  offices,
  • marine applications
  • food processing areas
  •  pools
  • water treatment plants
  • residential ceilings
  • Animal Shelters

Installation method

Recommend Using combination of P16 adhesive silicon and button head screw with fixing clip. (refer to installation instruction)

Maximum span and bending radius

  • 600mm centers of two beams for the 5mm or 8mm panels & 800mm for the 10mm panels
  • 600mm Maximum bending radius

Environmental

  • PVC site cuttings and unused pieces can be collected and recycled.
  • Product may be recycled upon final disposal.

TESTS AND CERTIFICATIONS

  1. Fire rating
  • Group 1 In accordance with Specification A2.4 of the Building Code of Australia (CSIRO AS/NZ 3837)
  • Group 1-S in accordance with ISO 5660 parts 1 &2 (NZBC Verification Method C/VM2 Appendix A)

Packaging, Handling, Protection and Delivery Instructions

  • PVCPLUS panels come delivered in carton and plastic shrink packaging, care should be taken when handling these panels since they are very flexible.
  • Each pack of product contains 10 panels ( 4 panels for the 400mm wide panels ) each pack weighs about 50 KG so for a safe work procedure it must be carried by two people. If a forklift is used, a solid board under the panels to support the full-length package is needed.
  • DO NOT keep the product outside the packaging in direct sunlight for too long or the sun might cause damage the surface finish. All the carton packaging is recyclable.

Warranty

Five years from product manufacturing defects.

Limitations

Not suitable for applications exposed to direct sunlight.

Installation guidelines

  • Use a steel blade on an angle grinder to cut the panels or use a drop / circular saw with an aluminum blade to get a nice clean cut.
  • Always use P16 glue with the mechanical fixings for a sound installation of the panels.It is highly recommended to wear your safety gears such as goggles and earplug when cutting the panels.
  • After completing the installation, simply remove all the protection films of the surface and wipe the dust to get the best look of the panels.

Maintenance and cleaning

Generally, PVCPLUS panels are maintenance free however if there is any dust or germ on the surface it can be wiped off by a damp cloth. Any oil product on the surface just add a small amount of standard detergent apply with cloth and then rinse.