U joint Ceiling panels

Nowadays, U joint wall panels are commonly used to create attractive feature wall or ceiling in the modern residential and commercial environments. Unlike the other options available in the market such as: cement, timber or MDF boards our panels are prefinished with a UV treated surface and 100% waterproof and they can be used in wet or dry areas, super easy and fast to install yet no future maintenance required except the general cleaning required. Standard colors of Matt white and champagne wood always in production but custom color for large quantities are also achievable.

These panels come with a Standard length of 5800mm with the following dimensions

Trims Come either in PVC with a matching finish to the panel, or in Aluminium with limited colors such as: White, black, silver, bronze.

Aluminium Range, comes in a standard length of 3m

Available colors:

Silver

White

Black

PVC resin and calcium carbonate

• Transfer printing and laminated with a UV resistant coating
• Custom design and colors can be made for bulk orders

• bathrooms
• caravan interiors
• portable homes
•  offices,
• marine applications
•  pools
• water treatment plants
• residential ceilings
• And many more

Recommend Using combination of P16 adhesive silicon and button head screw with fixing clip. (refer to installation instruction)

• Indoor , 600mm centres of two fixing points.
• Outdoor , 450mm centres of two fixing points.
• 600mm Maximum bending radius.

• PVC site cuttings and unused pieces can be collected and recycled.
• Product may be recycled upon final disposal.

1. Fire rating

• Group 1 In accordance with Specification A2.4 of the Building Code of Australia (CSIRO AS/NZ 3837)
• Group 1-S in accordance with ISO 5660 parts 1 &2 (NZBC Verification Method C/VM2 Appendix A)

• DEKKOPLUS panels come delivered in carton and plastic shrink packaging, care should be taken when handling these panels since they are very flexible.
• Each pack of product contains 5 panels and weighs about 48 KG so for a safe work procedure it must be carried by two people. If a forklift is used, a solid board under the panels to support the full-length package is needed.
• DO NOT keep the product outside the packaging in direct sunlight for too long or the sun might cause damage the surface finish. All the carton packaging is recyclable.

Five years from product manufacturing defects.

Not suitable for applications exposed to direct sunlight.

• Use a steel blade on an angle grinder to cut the panels or use a drop / circular saw with an aluminum blade to get a nice clean cut.
• Always use P16 glue with the mechanical fixings for a sound installation of the panels.It is highly recommended to wear your safety gears such as goggles and earplug when cutting the panels.
• After completing the installation, simply remove all the protection films of the surface and wipe the dust to get the best look of the panels.

Generally, DEKKOPLUS panels are maintenance free however if there is any dust or germ on the surface it can be wiped off by a damp cloth. Any oil product on the surface just add a small amount of standard detergent apply with cloth and then rinse.