U joint wall panels

U Joint Wall panels

Nowadays, U joint wall panels are commonly used to create attractive feature wall or ceiling in the modern residential and commercial environments. Unlike the other options available in the market such as: cement, timber or MDF boards our panels are prefinished with a UV treated surface and 100% waterproof and they can be used in wet or dry areas, super easy and fast to install yet no future maintenance required except the general cleaning required. Standard colors of Matt white and champagne wood always in production but custom color for large quantities are also achievable.

Advantages

wrench
Smart Tongue & groove system
low maintenance
Low Maintenance
Fast And easy to install
Fast And easy to install
Cost Effective
Cost Effective
certified
AU/NZ Certified
fire
Rated ( Group 1 )
Insect Proof
Insect Proof
water-proof
Waterproof

PRODUCT RANGE

These panels come with a Standard length of 5800mm with the following dimensions

300mmx8mm ( Width X Thickness )

300 U Groove-1
300 U Groove - detail

Finishes

Accessories

Trims Come either in PVC with a matching finish to the panel, or in Aluminium with limited colors such as: White, black, silver, bronze.

J profile

End Cap ( J profile )

The J profile is used to cap off the ends of the panel where the ceiling panels meet the wall or simply to cap off the cut section of the panel around corners.

H profile

H profile

The H profile is used to extend the panel beyond the standard length or to create a hidden joint instead of staggering the panels.

External Corner

External Corner

The External Corner is used where the panels meet at a 90 angle. such as the external corners around walls and windows.

Internal Corner

Internal Corner

The Internal Corner is used where the panels meet at a 90 angle. such as the internal corners around walls and the ceiling .

Aluminium Range, comes in a standard length of 3m

J profile

End Cap ( J profile )

The J profile is used to cap off the ends of the panel where the ceiling panels meet the wall or simply to cap off the cut section of the panel around corners.

H profile

H profile

The H profile is used to extend the panel beyond the standard length or to create a hidden joint instead of staggering the panels.

External Corner

External Corner

The External Corner is used where the panels meet at a 90 angle. such as the external corners around walls and windows.

Internal Corner

Internal Corner

The Internal Corner is used where the panels meet at a 90 angle. such as the internal corners around walls and the ceiling .

Available colors:

Silver

White

Black

Technical

Chemical composition

PVC resin and calcium carbonate

Surface Treatment & Colour

  • Transfer printing and laminated with a UV resistant coating
  • Custom design and colors can be made for bulk orders

Applications

  • bathrooms
  • caravan interiors
  • portable homes
  •  offices,
  • marine applications
  •  pools
  • water treatment plants
  • residential ceilings
  • And many more

Installation method

Recommend Using combination of P16 adhesive silicon and button head screw with fixing clip. (refer to installation instruction)

Maximum span and bending radius

  • 450mm centres of two beams for
  • 600mm Maximum bending radius

Environmental

  • PVC site cuttings and unused pieces can be collected and recycled.
  • Product may be recycled upon final disposal.

TESTS AND CERTIFICATIONS

  1. Fire rating
  • Group 1 In accordance with Specification A2.4 of the Building Code of Australia (CSIRO AS/NZ 3837)
  • Group 1-S in accordance with ISO 5660 parts 1 &2 (NZBC Verification Method C/VM2 Appendix A)

Packaging, Handling, Protection and Delivery Instructions

  • DEKKOPLUS panels come delivered in carton and plastic shrink packaging, care should be taken when handling these panels since they are very flexible.
  • Each pack of product contains 5 panels and weighs about 48 KG so for a safe work procedure it must be carried by two people. If a forklift is used, a solid board under the panels to support the full-length package is needed.
  • DO NOT keep the product outside the packaging in direct sunlight for too long or the sun might cause damage the surface finish. All the carton packaging is recyclable.

Warranty

Five years from product manufacturing defects.

Limitations

Not suitable for applications exposed to direct sunlight.

Installation guidelines

  • Use a steel blade on an angle grinder to cut the panels or use a drop / circular saw with an aluminum blade to get a nice clean cut.
  • Always use P16 glue with the mechanical fixings for a sound installation of the panels.It is highly recommended to wear your safety gears such as goggles and earplug when cutting the panels.
  • After completing the installation, simply remove all the protection films of the surface and wipe the dust to get the best look of the panels.

Maintenance and cleaning

Generally, DEKKOPLUS panels are maintenance free however if there is any dust or germ on the surface it can be wiped off by a damp cloth. Any oil product on the surface just add a small amount of standard detergent apply with cloth and then rinse.